TJM Esun PLA-Marble 3D Printing Filament 1KG - Grey

Material & Aesthetics

Material Base: Premium Polylactic Acid (PLA) Composite
Visual Finish: Authentic marble-stone appearance with natural, randomized dark speckles and a smooth matte texture
Layer Concealment: High (The marble speckle pattern naturally hides layer lines and minor printing imperfections)
Environmental Performance: Made from biological materials, non-toxic, eco-friendly, and low odor during printing

Physical & Mechanical Properties

Filament Diameter: 1.75 mm
Dimensional Tolerance: ±0.03 mm
Net Filament Weight: 1.0 kg (2.2 lbs)
Density: 1.24 g/cm³
Tensile Strength: 53 MPa
Elongation at Break: 11%
Bending Strength: 71 MPa
Impact Strength (IZOD): 5.4 kJ/m²

Recommended Printing Parameters

Nozzle (Extrusion) Temperature: 190 °C - 220 °C (Recommended baseline: 200 °C - 210 °C)
Heated Bed Temperature: 45 °C - 60 °C (Can be printed on unheated beds with proper adhesion)
Recommended Printing Speed: 40 - 100 mm/s
Cooling Fan: 100% (On)
Retraction Settings: Standard PLA retraction settings apply (Keep retraction fine-tuned to prevent stringing around the particles)

Spool & Packaging Specifications

Spool Design: Eco-friendly recycled cardboard spool or standard plastic spool
Winding Quality: Full mechanical neat winding to eliminate overlaps, crossing, and tangles
Packaging Type: Vacuum-sealed with an included industrial desiccant pack for reliable moisture protection

Compatibility & Application

Printer Compatibility: Universally compatible with 99% of open-source FDM 3D printers utilizing 1.75mm diameter filament
Ideal Applications: Architectural models, statues, sculptures, vases, interior decorations, and display pieces that require a premium stone/marble aesthetic

تنبيه مهم جداً لهذا المنتج: مادة eMarble هي عبارة عن PLA مخلوط بجزيئات صغيرة تعطي شكل الرخام أو الحجر الطبيعي.

• سهل الطباعة: الفيلّيمنت سهل جداً في الطباعة ومناسب للمبتدئين تماماً مثل الـ PLA العادي، كما أنه آمن على النوزل النحاسي العادي ولا يسبب تآكلاً سريعاً مثل ألياف الكربون.

• نصيحة لمنع الانسداد: الجزيئات الداخلية صغيرة جداً، ولكن لتجنب أي احتمالية للانسداد (Clogging)، لا يُنصح باستخدام نوزل صغير جداً بقطر 0.2 مم، ويفضل دائماً طباعته بنوزل 0.4 مم أو أكبر.