TJM Bambu Lab PLA Wood 3D Printing Filament 1KG - White Oak

Material & Aesthetics

Material Composition: Premium PLA composite infused with natural fine wood powder
Visual Finish: Authentic matte, grainy wood-like texture that effectively conceals layer lines
Scent Profile: Emits a subtle, natural wood-like fragrance during the printing process
Environmental Performance: Non-toxic, eco-friendly, and bio-degradable under managed conditions

Physical & Mechanical Properties

Filament Diameter: 1.75 mm
Dimensional Tolerance: ±0.03 mm
Net Filament Weight: 1.0 kg (2.2 lbs)
Density: 1.21 g/cm³
Tensile Strength (X-Y): 26 ± 5 MPa
Bending Strength (X-Y): 55 ± 4 MPa
Melting Temperature: 156 °C
Vicat Softening Temperature: 64 °C

Recommended Printing Parameters

Nozzle (Extrusion) Temperature: 190 °C - 240 °C
Heated Bed Temperature: 35 °C - 45 °C (with Build Plate Glue recommended)
Recommended Printing Speed: < 250 mm/s
Compatible Build Surfaces: Textured PEI Plate, Smooth PEI Plate, Cool Plate
Nozzle Size Compatibility: 0.4 mm, 0.6 mm, 0.8 mm (Strictly NOT compatible with 0.2 mm nozzles)

Spool & AMS Compatibility

Spool Integration: Includes 1 x Bambu Reusable Spool (ABS, heat resistant up to 70 °C)
Smart Detection: Equipped with Bambu RFID Tag for automatic parameter configuration on AMS systems
System Compatibility: Fully compatible with Bambu Lab AMS and AMS lite

Storage & Drying Guidelines

Moisture Sensitivity: High (Wood powder absorbs moisture faster than standard PLA)
Drying Requirements: Blast drying oven at 55 °C for 8 hours, or X1 Series Heatbed at 65 - 75 °C for 12 hours

تنبيه مهم جداً لهذا المنتج: هذا الفيلّيمنت مخلوط بمسحوق الخشب الطبيعي، لذلك فهو حسّاس جداً للرطوبة ويحتاج إلى حفظه دائماً في مكان جاف ومغلق.

لحماية طابعتك وتجنب الانسداد: هذا النوع غير متوافق نهائياً مع النوزل الصغير جداً (0.2 مم) لأنه سيتسبب بانسداده فوراً، ويرجى دائماً استخدام نوزل بقطر 0.4 مم أو أكبر (يفضل نوزل فولاذي مصلد Hardened Steel أو ستانلس ستيل لتجنب التآكل الناتج عن جزيئات الخشب).