TJM Bambu Lab PLA Silk Gilded Rose 3D Printing Filament 1KG

Material & Multi-Color Aesthetics

Material Type: Co-Extruded Premium Silk Polylactic Acid (PLA Silk Multi-Color)
Color Architecture: Multi-color co-extrusion blend (Combines 2 or 3 distinct color strands within a single filament filament for multi-tonal, dynamic shade shifts depending on the viewing angle)
Visual Finish: High-gloss, luxury silk-like metallic sheen with smooth gloss transitions
Layer Concealment: High (The blending colors and specular silk reflections effectively blend and mask visible layer lines)

Physical & Mechanical Properties

Filament Diameter: 1.75 mm
Dimensional Tolerance: ±0.03 mm
Net Filament Weight: 1.0 kg (2.2 lbs)
Density: 1.25 g/cm³
Tensile Strength (X-Y): 38 ± 3 MPa
Bending Strength (X-Y): 69 ± 4 MPa
Impact Strength (XY-Toughness): 22.1 ± 1.8 kJ/m²
Heat Deflection Temperature (HDT): 53 °C

Recommended Printing Parameters

Nozzle (Extrusion) Temperature: 210 °C - 240 °C (Recommended baseline: 220 °C)
Heated Bed Temperature: 35 °C - 45 °C
Recommended Printing Speed: Max 200 mm/s (Slower speeds highly optimized for uniform color layout and deeper gloss intensity)
Compatible Build Surfaces: Textured PEI Plate, Smooth PEI Plate, Cool Plate
Cooling Fan Speed: 100% (Maximum cooling for fine detail over multi-color shifts)

Hardware Compatibility & Eco-System

Package Type: Full Spool Package (Includes 1 x Genuine Bambu Reusable Spool made of high-temperature resistant ABS up to 70 °C)
Smart Detection: Built-in active RFID chip automatically syncs exact multi-color profile, material parameters, and optimized speed settings with Bambu Lab AMS systems upon loading.
Nozzle Hardware: Recommended for 0.4 mm Stainless Steel or Hardened Steel nozzles (Not recommended for 0.6 mm or 0.8 mm nozzles to maintain high surface gloss details).

Storage & Drying Guidelines

Drying Requirements: Blast drying oven at 55 °C for 8 hours, or Bambu X1/P1 series heatbed at 65 °C - 75 °C for 12 hours.
Storage Environment: Highly hygroscopic; must be kept in a sealed container or AMS system at < 20% RH with fresh desiccant to preserve surface properties.