TJM Bambu Lab PLA Matte Lemon Yellow 3D Printing Filament 1KG

Aesthetics & Surface Finish

Material Type: Premium Matte Polylactic Acid (PLA Matte)
Visual Finish: Full matte, low-gloss tactical finish for a clean, non-reflective appearance
Layer Line Masking: High (The matte surface scatters light effectively to conceal layers and minor surface flaws)
Ideal Applications: Architectural models, prototyping, display figures, daily household prints, and cosmetic cases

Physical & Mechanical Properties

Filament Diameter: 1.75 mm
Dimensional Tolerance: ±0.03 mm
Net Filament Weight: 1.0 kg (2.2 lbs)
Density: 1.31 g/cm³
Tensile Strength (X-Y): 33 ± 3 MPa
Bending Strength (X-Y): 69 ± 4 MPa
Impact Strength (XY-Toughness): 19.5 ± 1.6 kJ/m²
Heat Deflection Temperature (HDT): 54 °C

Recommended Printing Parameters

Nozzle (Extrusion) Temperature: 190 °C - 230 °C (Recommended baseline: 210 °C)
Heated Bed Temperature: 35 °C - 45 °C
Maximum Printing Speed: ≤ 300 mm/s (Fully optimized for high-speed CoreXY print movements)
Compatible Build Surfaces: Textured PEI Plate, Smooth PEI Plate, Cool Plate (Bambu glue helper recommended for smooth surfaces)

Hardware Compatibility & Eco-System

Package Type: Full Spool Package (Includes 1 x Genuine Bambu Reusable Spool made of high-temperature resistant ABS)
Smart Detection: Built-in active RFID chip automatically syncs exact color, material profile, and optimized speed settings with Bambu Lab AMS systems upon loading.
Nozzle Selection: Works flawlessly with standard 0.4 mm Stainless Steel or Hardened Steel nozzles (Non-abrasive formula).

Storage & Drying Guidelines

Drying Requirements: Blast drying oven at 55 °C for 8 hours, or Bambu X1/P1 series heatbed at 65 °C - 75 °C for 12 hours.
Storage Environment: Keep in a dry box or within the AMS chamber with fresh desiccant packings (< 20% RH) to preserve optimized flow parameters.